LG Washer UE Code? What It Means and What to Check

The UE code on an LG washing machine means the washer detected an unbalanced load. The laundry has piled up on one side of the drum, the load is the wrong size or type, or the washer isn’t level. Once UE shows, pause the washer, wait for the drum to stop, spread the laundry evenly and check that it sits level. On an LG top-load, lowercase uE means the washer is still trying to rebalance, and an empty Rinse & Spin cycle shows whether a returning UE needs repair.

Your LG washerFirst check
Front-load, UE on the displaySpread the laundry and aim for a drum about two-thirds full
Top-load, lowercase uEThe washer is still trying to rebalance by itself
Top-load, uppercase UERedistribute the load by hand. If it keeps returning, run an empty Rinse & Spin
Top-load, code returns on an empty drumRequest repair

LG Front-Load Washer Showing UE

Pause the washer and wait for the drum to stop before you open the door. Then check these in order:

  1. Items that shouldn’t be in the washer. LG says bath mats, carpets, electric blankets, curtains and rubber mats can be damaged in the machine, and waterproof clothing and dolls may damage the washer. For pillows and cushions, take out the stuffing and wash only the covers. If your model has the cycles, wash a blanket on Duvet and a padded or down jacket on Sportswear, both at medium spin.
  2. Load size. The washer performs best with the drum about two-thirds full. A load that is too large or too small can trigger the code.
  3. How the laundry sits. Take the laundry out, spread it evenly and choose a spin cycle that suits the load. If you use laundry nets, fill each one no more than two-thirds, and wash two or three together with some clothes rather than one net alone.
  4. Level. If the washer rocks when you push it gently, it may need leveling. Our Washing Machine Shaking Violently guide covers the leveling checks.

If UE keeps coming back after these checks, request service.

LG Top-Load Washer Showing uE or UE

On an LG top-load washer, the two spellings mean different stages. Lowercase uE means the washer is trying to balance the load: it fills with water, agitates, drains and tries to spin again. After three failed attempts it shows uppercase UE, which means it couldn’t fix the imbalance. LG lists Ub with these codes but doesn’t explain it separately.

When UE shows, redistribute the load by hand. Pause the washer, wait for the drum to stop and spread the laundry out. A small load can bunch up, so add a few items or lower the spin speed. A single bulky item such as a pillow or rug throws the weight to one side, so add a few other items. Sheets and blankets can tangle, so spread them out and consider a lower spin speed.

If the code keeps coming back, run the empty-drum test:

  1. Empty the drum completely.
  2. Turn the washer on, select Rinse & Spin and press Start. The cycle takes about 20 minutes.
  3. Watch the display.

What the result means:

  • The code comes back. LG says the washer isn’t working properly and needs repair.
  • No code. LG says the washer doesn’t need repair. The cause is the leveling, the load or the cycle you chose, so check the leveling and the cycle next.

Level. With the lid open, look at the plastic guard around the drum. If one side looks more exposed, raise the side the tub is leaning toward by turning the leveling bolts: clockwise raises the washer, counterclockwise lowers it. Adjust only as far as needed, because legs extended too far can make the washer vibrate. Then run Rinse & Spin with about six pounds of laundry and watch the spin. If the washer rocks or vibrates, adjust the feet again.

Cycle. On Cotton/Normal or Heavy Duty, LG says the Fabric Softener option changes the rinse to a deep rinse that spreads the load better. It is a cycle option, so check your manual for how it works on your model. A lower spin speed, or Perm Press/Casual, which uses more water, can also help. If UE still shows, redistribute the load by hand.

Some noise or vibration when the drum starts spinning and when it slows at the end of spin is normal and isn’t a fault.

When to Request Repair

  • Top-load: the code returns during the empty Rinse & Spin cycle.
  • Front-load: UE keeps coming back after the item, load and level checks.

Checking the inside of the washer is a technician’s job, so don’t open the cabinet. Tell them your model number, whether it is a front-load or top-load, what the display shows and, on a top-load, whether the code appeared in the empty cycle.

If the display shows OE instead of UE, read our LG Washer OE Code guide. If there is no code and the washer drained but won’t spin, use our Washing Machine Not Spinning guide. For other washer problems, continue with our Washing Machine Troubleshooting guide.

Sources

Last reviewed: October 24, 2026