A musty smell in a washing machine usually comes from trapped moisture and residue: wet laundry left in the drum, a closed door or lid, too much detergent, or buildup in the detergent drawer or door seal. Take the laundry out, leave the door open to dry, and wipe the drawer and, on a front-load, the seal. Then run the cleaning cycle your manual names, using only the cleaner it recommends. Never mix bleach with other cleaning products.
| Check | What to do |
|---|---|
| Laundry in the drum | Take wet laundry out as soon as the cycle ends |
| Door or lid | Leave it open between loads, with the drawer open too |
| Detergent | Use the detergent type and amount recommended for your washer |
| Detergent drawer | Pull it out and clean it |
| Door seal (front-load) | Wipe it and dry it |
| Drain pump filter | Clean it if your model has an accessible one |
| Drain hose | Make sure it isn’t pushed deep into the standpipe |
Table of Contents
Clean the Places That Hold Moisture
Door seal. On an LG front-load, water left in the gasket stagnates and starts to smell. LG says some water there is normal and suggests wiping the gasket and door dry when the machine is done for the day. To clean it, the makers differ:
- LG: diluted liquid chlorine bleach in warm water, or vinegar instead. LG says never use the two together and never use undiluted bleach on the gasket.
- GE: mild detergent, diluted bleach or diluted vinegar, then wipe the solution off with warm water.
- Maytag: an all-purpose cleaner made for appliance use, rinsed with warm water. Maytag warns against harsh chemicals that could damage the seal.
Detergent drawer. LG says to clean it weekly on a front-load. Samsung says to wipe it dry after each wash and deep clean it monthly. GE says once or twice a month on a front-load. Maytag and Whirlpool say regularly, following your manual.
Pump filter. Samsung and GE both list it. If you recently ran a hot cycle such as Self Clean, Samsung says to wait an hour for the water to cool before you open the filter. The steps are in our drain guide.
Drain hose. GE says a hose pushed too far into the standpipe can siphon drained water back into the washer and cause a musty smell, and LG lists the hose setup among its causes. Check your manual for the right depth, and clip the hose to the side of the standpipe so it can’t slide down, as GE suggests.
Run the Cleaning Cycle Your Maker Names
Run it with the drum empty, and use only the cleaner your manual names. Never mix bleach with other cleaning products. The CDC gives the same warning. Each maker below says something different:
| Maker | What it says |
|---|---|
| LG | Use a washing machine tub cleaner in the Tub Clean cycle and follow the package. On a front-load, LG warns against chlorine bleach and acidic cleaners in that cycle |
| Samsung | Run Self Clean or Pure Cycle. For an existing mildew smell or visible mold, Samsung has a separate bleach procedure. It is not for routine cleaning |
| Whirlpool | Clean Washer cycle with an affresh tablet or liquid chlorine bleach |
| Maytag | Clean Washer cycle with affresh or liquid chlorine bleach |
| GE | Front-load: bleach or a commercial washer cleaner. Top-load: Tide Washing Machine Cleaner, or a hot, longest cycle with bleach |
Amounts and where the cleaner goes depend on the model, so follow the steps for yours. Whirlpool and Maytag say not to use thickened, easy-pour or no-splash bleach. Vinegar and baking soda aren’t on Whirlpool’s or Maytag’s cleaning-cycle pages, so add them to a cycle only if your manual names them. If a musty smell is already there, LG says to run Tub Clean once a week for three weeks in a row. When the cycle ends, leave the door or lid open so the inside can dry. LG says to supervise children and make sure they don’t play inside the washer while the door is open.
Keep the Smell From Coming Back
The checks in the table above double as prevention. Add the cleaning cycle on your maker’s schedule:
- Maytag, Samsung and a GE front-load: about monthly.
- Whirlpool: at least monthly or every 30 wash cycles, whichever comes first.
- LG front-load: once or twice a month.
If you wash mostly in cold, Samsung suggests an occasional warm or hot cycle, and Whirlpool says cold-only washing lets soil build up faster.
If the Smell Stays
- LG: if the problems persist after the three weekly Tub Clean cycles, request a repair.
- Samsung: if the odor or mold remains after several attempts at Samsung’s cleaning procedure, contact Samsung Support.
- Maytag, Whirlpool and GE: they don’t set a number of attempts. Contact the maker if the smell is still there.
If the smell is closer to rotten eggs or sewage, use our rotten eggs guide instead. For other problems, see Washing Machine Troubleshooting.
Sources
- LG USA: How to clean the tub of your LG washing machine, Troubleshooting musty odors and Front load washing machine odor gasket
- Samsung US: Mildew smell or visible mold, Washing machine or laundry smells bad and How to clean your Samsung washer
- Whirlpool: Removing odors from the interior of a washer and Removing odors or smells, front load washer
- Maytag: Removing odors or smells, front load washer, Removing odor or smell, top load washer and Cleaning a front load washer door seal
- GE Appliances: Front load washer, odor in tub and Top load washer, odor in tub
- CDC: How to safely clean and sanitize with bleach
Last reviewed: October 25, 2026