Washing machine not agitating? First check what still works. If it fills, drains and spins normally but the laundry does not move during the wash, put one item of clothing in the tub, note where it is and let the washer run for a minute or two. Some top-loaders pause briefly after filling or move the laundry more gently than older machines, so judge by the result, not the sound. If the item does not move, check the lid, load and cycle. If there is still no wash action after these checks, or a code keeps returning, book service.
| What you see | First check |
|---|---|
| The washer fills, then seems to do nothing | Wait 20 to 30 seconds. GE says some models need that long to sense the load. |
| The wash motion looks slow or weak | The cloth test below. Newer washers are quieter and gentler. |
| Laundry floats, or the top of the load stays still | The load size, the cycle and the water level |
| Nothing moves after the cloth test | The lid, the Start/Stop button and the soak setting |
| It spins and drains but never moves the laundry | The spin and drain section below |
| A code is showing | The code section below, or your manual |
Table of Contents
Does Your Washer Have an Agitator?
Before you decide the agitator is not working, find out what moves the laundry in your washer. Top-load washers use either an agitator or an impeller. An agitator is a center post that swings back and forth. An impeller is a low disc at the base that sets up a current of water to move the laundry. Samsung describes both as normal top-load designs.
Front-loaders use a different wash action. LG says they use gravity to tumble the laundry, lifting and dropping it through the water, so there is no agitator to fail. If you have a front-loader, this guide is not the best match because there is no agitator to check.
Is It Really Not Moving? Try the Cloth Test
Sound is a poor guide, because GE says newer top-loaders run much more quietly than older ones. GE suggests this simple test instead:
- Put one item of clothing in the tub and note where it is.
- Close the lid and let the washer run for a minute or two.
- Wait until the motion stops, then open the lid. If the item has moved, the washer is agitating.
Some slow or gentle motion is normal. LG says that models with 6 Motions turn the tub slowly during the untangle motion, that light, bulky items such as duvets float so the top can look still while the bottom moves, and that the Hand/Wool cycle is gentler on purpose. LG says none of this is a product defect.
Washing Machine Not Agitating but Filling With Water
If the item didn’t move, check these in order. They come from GE’s top-loader pages, so check your manual for your brand.
- Wait. After filling stops, it can take 20 to 30 seconds for the washer to sense the load and start.
- The lid. The washer won’t agitate or spin with the lid up, even though many models still fill, drain and advance the timer. Close the lid fully.
- Start/Stop and the timer knob. Check that Start/Stop or Pause wasn’t pressed and the timer knob wasn’t pushed in.
- Soak. Some models run a 15 or 30 minute soak before the main wash. Check the cycle isn’t set to soak.
Check the Load and Cycle
Whirlpool and Maytag list the load and the cycle among the first checks. If the load is lopsided, pause the cycle, wait for the drum to stop and spread the laundry evenly.
If the washer is shaking hard rather than just failing to move the laundry, use our Washing Machine Shaking Violently guide.
Use the cycle that fits the fabric and the load. Whirlpool and Maytag say a low-water cycle can leave clothes struggling to agitate, while cycles such as Bulky use more water.
Avoid adding extra water. They say it can make clothes float so they don’t agitate properly, and it dilutes the detergent.
Washing Machine Will Not Agitate but Will Spin and Drain
If the washer fills, drains and spins normally but the laundry still doesn’t move during the wash, you’ve narrowed the symptom to the wash portion of the cycle. Once you have done the cloth test and checked the lid, load and cycle, stop there rather than taking the agitator or cabinet apart.
Whirlpool and Maytag direct users to service when the load and cycle checks don’t restore normal agitation, and GE also recommends service when its troubleshooting doesn’t correct the problem.
Book service and tell the technician that the washer fills, drains and spins but does not move the laundry during the wash.
If a Code Appears
Codes differ between brands, so use your manual’s list. Two are worth knowing.
- LG top-loaders,
AE,LEorLE1. LG saysAEmeans the gears that turn the drum can’t operate properly, andLEorLE1means the motor is stuck. A coin or other object trapped between the wash plate and the drum can cause any of them. Unplug the washer and remove only an object you can clearly see, using tweezers, as LG says. If nothing is trapped and the drum still doesn’t turn properly, LG says to request service. - GE top-loaders from 2015 on. If
CAnCELEdscrolls or the two right-most lights flash, select Drain & Spin and press Start. If the problem continues, disconnect the power for 1 minute and reconnect it.
GE HydroWave models only. GE has a motor reset for select HydroWave top-loaders, generally made from 2011 through 2015. Check your model first, then follow GE’s HydroWave reset page listed in Sources. If agitation doesn’t return, or stops again after a couple of loads, GE says to book service.
When to Stop and Book Service
Book service if any of these apply:
- The laundry never moves in the cloth test after the lid, load and cycle checks.
- If the washer won’t agitate and won’t spin, use our Washing Machine Not Spinning guide to check whether it drained and what to check next.
- A code returns, or you find no trapped object after
AE,LEorLE1. - The lid probe or magnet looks missing or damaged. GE says the washer won’t agitate or spin without it, even with the lid closed.
Give the technician your model number, the cloth test result and any code.
If the washer stops partway through a cycle instead, use our Washing Machine Stops Mid Cycle guide.
For other washer problems, continue with our Washing Machine Troubleshooting guide.
Sources
- Whirlpool Product Help: Not agitating, top-load washer
- Maytag Product Help: Not agitating, top-load washer
- GE Appliances: Top load washer, fills but will not agitate
- GE Appliances: Top load washer, HydroWave motor reset
- LG USA: Top-load washer, drum rotation is weak when washing
- LG USA: Top-load washer error code list
- LG USA: Low water level in the drum
- Samsung US: Agitator vs impeller washer
Last reviewed: October 17, 2026