Samsung Washer SUD Code? What It Means and What to Check

A SUD code on a Samsung washer means the machine detected too many suds. It pauses for a short period to let the foam settle, then continues the cycle on its own. The code can flash again at the end as a reminder, and Samsung says it doesn’t mean the washer needs service. The cause is incorrect detergent use, so for the next load use HE detergent and the least amount that cleans.

What to Change Before the Next Load

CheckWhat to do
Detergent typeUse HE (high efficiency) detergent only. Samsung says regular detergent can damage the washer.
Detergent amountUse the least amount that cleans. HE detergent is concentrated, and a smaller load needs less.
DispenserDon’t fill the drawer past its MAX line. If the recommended amount is more than the line allows, reduce the load size.

If Suds or Residue Remain Between Loads

Samsung’s guide for soap scum buildup says to run an empty cycle with no detergent or other additives, and to keep running empty cycles until suds no longer appear. That step is for residue left in the washer. It isn’t something to do while the SUD pause is under way.

SUD, SUd, 5UD: Same Code

Samsung’s U.S. code list shows SUd, SUdS, 5UD, Sd, 5d and 5Ud5 as the same excessive-suds error.

If the Code Is Not SUD

Look it up in Samsung’s U.S. error-code list, or see our guides to the Samsung 4C code and the Samsung DC code. A washer that stopped with no suds code is covered in Washing Machine Stops Mid Cycle, and detergent left on clothes in White Residue on Clothes After Washing. For any other symptom, start from the washing machine troubleshooting guides.

Sources

Last reviewed: October 29, 2026