The Samsung washer 4C code means water is not entering the washer correctly. Samsung lists the 4E and nF codes under the same error. Open both water valves all the way, make sure the hoses are not kinked and are on the matching hot and cold inlets, and check the drain hose depth. Then unplug the washer or turn off its breaker for one minute and run a cycle. If the code comes back, request service from Samsung.
Which Samsung Code Do You Have?
| Code | What it means | What to do |
|---|---|---|
| 4C, 1 4C, nF, 4E | Water is not entering the washer correctly | Follow the steps below |
| 4C2, 4E2, CE, 14C2, nF1 | The cold water supply is extremely hot | Connect the cold hose to the cold inlet and the hot hose to the hot inlet. Samsung says this code does not mean service is needed. |
Older Samsung models may use nF or 4E for the hot and cold water error instead. Connecting the hoses to the matching inlets, as in step 1 below, fixes that one too.
How to Fix the 4C Code, in Order
- Check the hoses. Make sure neither hose is bent or kinked, and that the hot hose is on the hot inlet and the cold hose is on the cold inlet. Do not use Flood Safe hoses.
- Open the valves. Open both water valves completely and leave them open while the washer runs.
- Check the drain hose. It should not be kinked, and it should go 6 to 8 inches into the drain pipe.
- Reset the power. Unplug the washer or turn off its circuit breaker for one minute, then restore power and start a cycle.
- Clean the filters. Turn the water supply valves off and disconnect the hoses from the back of the washer. Carefully remove the filters and clean them. Reconnect the hoses and open the valves fully.
A Slow Start Is Not a 4C Error
Some Samsung washers rotate the drum for 2 to 5 minutes at the start of a cycle to weigh the load before water comes in. This delay can be normal. If the display shows 4C, follow the steps above.
If the Code Keeps Coming Back
If 4C returns after every step above, request service through the Samsung Support Center. For a different Samsung code, see our guides to the SUD code and the DC code. For a washer that will not fill and shows no code, or for another brand, read Washing Machine Not Filling With Water. More fixes are in the washing machine guides.
Sources
- Samsung US Support: Samsung washer error codes
- Samsung US Support: Samsung washer not filling with water
Last reviewed: November 1, 2026
